Chapter 6; Topic 9

Chapter 6; Topic 9

RF Configuration Parameters Available in RF Profiles

TPC, CHDM, and DCA can be customized by identifying the RF profiles and applying them to different AP groups that belong to the respective AP group. The configuration of the global 5GHz parameters has made it mandatory to use a data rate of 12mbps. The TPC transmits power level limits have set at a default of 30 and 10 dBm. All APs that are not members of a particular group have to be applied using the RRM values. It is crucial to understand that every FR profile must inherit its parameters from the global RRM settings. Main Auditoriums refer to APs in large auditoriums belonging to an AP group for each building

RF Configuration Parameters Available in RF Profiles; Internet source

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_01100010.pdfRF Profiles enable individuals to adjust groups of APs that share a normal coverage zone and selectively change how RRM will operate the APs within that coverage zone. After creating or modifying an existing AP group, a new setting takes over, and a set of new commands takes effect. These commands include; Applying and presenting the same RF program is a must because every controller of the AP group or the action will fail for that controller and assigning the same RF profile to more than one AP group. Using RF profiles and AP groups allows an administrator to optimize the RF settings for AP groups that operate in different environments or coverage zones.